User Manual

LEVEL lets you adjust the overall output of your Replica.
The TAP button in the bottom-right corner of your Replica lets you set the
tempo of your delay while you play. Just tap along to the beat, and you’re
up and running.
Use the BROWN switch to take the high-end edge off your delay and recre-
ate the great tape-echo effects of the Golden Age of rock ‘n’ roll.
The SUBDIVISION switch lets you split your delay into 1/4-note triplets that
follow the tempo you tap in.
The INPUT LEVEL knob on the side of your Replica lets you turn down the
input signal to eliminate overload distortion when your pedal is at the end
of an effects chain or used as part of an effects loop from your amp.
INS AND OUTS
Replica’s input and output jacks offer lots of setup options and are designed
to protect the integrity of your sound. Even when your delay is switched off,
true hardwire bypass makes sure your signal stays pure all the way to the
amp.
Besides the standard input and output jacks on your Replica, the pedal
features a DIRECT output and a MIDI jack.
The DIRECT output lets you send a clean signal (with no echo) to a tuner, or
even to another amplifier for cool stereo effects. The MIDI jack (input only)
lets you control your delay’s tempo (MIDI CTL no. 20) and on/off (MIDI CTL
no. 21) via an external midi controller.
Your Replica can be used in an effects loop, but note that input signals
above 2 dBu can cause distortion.