MSDS

Spill/Leak Procedures: Stop spill/leak at source. Confine spill with diking or
other measures. Clean spill but do not allow material into sewer or water ways.
Ventilate area to reduce the possibility of breathing vapor.
Cleanup: Mix material with sand or other stable inert materials. Dispose of
material properly- follow all local and federal laws.
Regulatory Requirements: Notify local Officials if necessary. Follow all local or
federal laws regarding disposal of solid waste.
Section 9-Safe Handling
Ventilation: Mechanical- Recommended
Special- N/A
Other- N/A
Respiratory Protection (Special type): Use only with adequate ventilation. If
adequate ventilation is not possible, wear appropriate respiratory equipment.
Protective Glove: Chemically resistant rubber gloves are recommended.
Eye Protection: Wear eye protection at all times.
Other Protective Equipment: Wear protective clothing that is suitable to the
process. Wash any contaminated clothing before re-use. A clean water source
should be available for washing eyes and skin.
Section 10- Ecological Information
Ecotoxicity: No data
Environmental Fate
Environmental Transport: No data
Soil Absorption/Mobility: No data
Disclaimer
THE INFORMATION AND RECOMMENDATIONS PROVIDED ARE BELIVED TO BE
CORRECT AND ACCURATE AS OF THIS WRITING. HOWEVER, THE
INFORMATION CONTAINED HEREIN IS PROVIDED WITHOUT WARRANTY OF ANY
KIND AND EMI CORP DOES NOT ACCEPT ANY LIABILITY OR LEGAL
RESPONSIBILITY FOR ITS USE AND RELIANCE UPON THE SAME.