User manual

2
prevented. Never hold the device under running water. Please follow the instructions
of “ Maintenance and troubleshooting“.
Notes and instructions with the following symbols require particular attention:
Any nonobservance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Technical Data
Model
HWW 3000 INOX
HWW 4500 INOX
Mains voltage / frequency
230 V ~ 50 Hz
230 V ~ 50 Hz
Nominal performance
550 Watt
1,200 Watt
Protection type
IP 44
IP 44
Suction port
30.93 mm (1 “), female
30.93 mm (1 “), female
Pressure port
30.93 mm
(1 “)
, female
30.93 mm
(1 “)
, female
Max. flow rate (Q
max
)
1)
2,950 l/h 4,350 l/h
Max. pressure
3)
4.2 bar 5.0 bar
Max. delivery height (H
max
)
1), 3)
42 m
50 m
Max. suction height
9 m
9 m
Volume of the pressure tank
18 l
22 l
Max. size of the solids being pumped
3 mm
3 mm
Max. permissible operating pressure
6 bar
6 bar
Min. ambient temperature
5 °C
5 °C
Max. ambient temperature
40 °C
40 °C
Min. fluid temperature
2 °C
2 °C
Max. fluid temperature (T
max
)
35 °C
35 °C
Max. cut-in frequency in one hour
40, evenly distributed
40, evenly distributed
Length of connection cable
1.5 m
1.5 m
Cable type
H05RN-F
H07RN-F
Weight (net)
9.9 kg
14.4 kg
Guaranteed sound power level (L
WA
)
2)
78 dB
86 dB
Measured sound power level (L
WA
)
2)
75.2 dB
84.5 dB
Sound pressure level (L
pA
)
2)
67.2 dB 78.9 dB
Dimensions (L x D x H)
46 x 27 x 47 cm
48 x 28 x 56 cm
Item no.
31143
31140
1)
2)
3)
The values were determined with free, unreduced in- an outlet.
Noise emission values obtained according to the EN 12639 regulation. Measurement method according to EN ISO 3744.
Due to the factory pre-set switch off pressure of the pressure switch, pressure is limited to approx. 3 bar (30 m delivery
head). The theoretically achievable pressure of the pump unit of the domestic water supply can reach the value specified
under “Max pressure”. Consult a qualified specialist, to adapt the pressure circuit to your requirements if necessary, see
also the chapter “Setting the pressure switch”.
3. Range of use
Booster sets from T.I.P. are self-priming electrical pumps with a mechanical or electronic pump control system for
automated operation. These high-quality products with their convincing performance data were developed for the
various purposes involved with irrigation, domestic water supply and pressure boosting, as well as for discharging
water at a constant pressure. The devices are suitable for pumping clean, clear water.
The typical areas of use of booster sets include: Automatic domestic water supply with grey water from wells and
cisterns, automated irrigation of gardens and garden beds and sprinkling, pressure boosting within the domestic
water supply system.
10