User manual

4
Model
WPS 3000 R
WPS 4000 R
Mains voltage / frequency
220 - 240 V~ 50 Hz
220 -240 V~ 50 Hz
Rated power
55 Watt
75 Watt
Degree of protection
IPX8
IPX8
Max. flow rate (Q
max
) *
3,000 l/h
4,000 l/h
Max. pressure
0.28 bar
0.3 bar
Max. delivery head (H
max
) *
2.8 m
3 m
Max. immersion depth
2 m
2 m
Maximum temperature of the pumped liquid (Tmax)
35 °C
35 °C
Length of line cord
10 m
10 m
Type of cord
H05RN-F
H05RN-F
Net weight
2.6 kg
3.1 kg
Item Part Nr.
30423
30424
* The values were determined with free, unreduced outlet
4. Technical data
This product is an immersion pump; the motor is completely cast in epoxy resin. The
pumps are designed for use in water, such as: garden pond, fish pond, fountains, terrace
fountains, indoor spray fountains, for operating filter systems, streams, etc. as well as for
water aeration and circulation. This device has been developed for private use and not for
industrial or commercial purposes.
The pump is not suitable for displacement of salt water, faecal matter, flammable,
corrosive or other hazardous liquids. The pumped liquid must not exceed the
maximum temperature specified in the technical data.
5. Scope of delivery
Pump with 10 m cable, telescopic riser, three-way diverter, hose connection ports
( 15 mm / 20 / 35mm), volcano nozzle, bell nozzle, foam nozzle (not WPS 1000),
ball head screw connection, operating instructions.
6. Commissioning / Installation
You can find explanatory figures at the end of the usage instructions. The numbers
in brackets in the following text relate to Fig. 3.
Important! The pump must not run dry, i.e. without water. Otherwise the
possibility if damage cannot be ruled out!
13