Instructions

6
5. Electrical connection
The appliance is supplied with line cord and plug. Do not carry or pull the unit by the line cord or plug.
Protect the plug and the line cord from heat, oils and sharp edges.
Check that the voltage shown on the label of the unit corresponds to the
voltage of the mains supply. The person responsible for the installation must
ensure that all electrical connections are earthed
according to the electrical
regulations of the authority in the area.
Connect the unit only to power supplies with residual current circuit breaker
(RCCD) with sensitivity of 30mA (DIN VDE 0100T739). (earth leakage
system)
The electrical supply cord connections of this unit are completely encased
with epoxy resin and cannot be replaced or repaired. In case of damage the
unit has to be disposed of.
Check that the voltage shown on the label of the unit corresponds to the voltage
of the mains supply
6. Operating Instructions