User manual

2
Any nonobservance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
Submersible dirty water pumps from T.I.P. are highly efficient electrical pumps for discharging clear or dirty water
containing solids up to the maximum size specified in the technical details. These high-quality products with their
convincing performance data were developed for the multiple purposes involved with draining and pumping
liquids from one place to another.
Typical applications for waste water submersible pumps are: Emptying ponds, tanks, storage tanks, and waste
water pits, as well as emergency drainage in the event of flood or high water.
Submersible dirty water pumps from T.I.P. are suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes or for
continuous circulating.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants of the pond will be
sucked in.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. temperature of the liquids to be discharged
stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.
3. Technical Data
Model
Maxima 250 SX
Mains voltage / frequency
230 V~ 50 Hz
Nominal performance
600 Watt
Protection type
IP68
Pressure port
41.91 mm
(1 ¼ “)
, male
Max. flow rate (Q
max
)
1)
14.500 l/h
Max. pressure
0.8 bar
Max. delivery height (H
max
)
1)
8 m
Max. submersion depth 
7 m
Max. size of the solids being pumped
25 mm
Max. fluid temperature (T
max
)
35 °C
Max. cut-in frequency in one hour
30, evenly distributed
Length of connection cable
10 m
Cable type
H05RN-F
Weight (net)
5.4 kg
Min. self-priming level (A)
2)
103 mm
Min. suction level (B)
2)
37 mm
Cut-in level (C)
2)
390 mm
Cut-out level (D)
2)
130 mm
Dimensions (L x D x H)
20 x 16 x 34 cm
Item no.
30264
1)
2)
The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, one connection port, a drain hose 10 m, a hose clamp, one operating manual.
8