Instructions

2
Any nonobservance of these instructions involves the danger of bodily harm to
people and/or damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock which may
cause damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer
has to be informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
These for special applications developed submersible multistage pumps from T.I.P. are highly efficient
electrical pumps for discharging clear, clean or moderately dirty water containing solids up to the
maximum size specified in the technical details. These high-quality products with their convincing
performance data were developed for the multiple purposes involved with irrigation, draining and
pumping liquids from one place to another.
The typical ranges of application of DrainPress pumps include: draining of pools, basins and storage
containers as well as the operation of irrigation systems and draining from rooms (thanks to low
suction function). This pump is suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes
or for continuous circulating.
The device is not suitable for use in swimming pools when people or animals are in the water or for
installation in public water mains.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
The pump is not suited to discharge saltwater, faeces, inflammable, etching,
explosive or other hazardous liquids. Please observe the max. temperature of the
liquids to be discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being
discharged in case of any improper operation or damage of the device. The
lubricants used are biologically degradable and non-hazardous to health.
3. Technical Data
Model
DrainPress 3200/24 6HW
Mains voltage / frequency
230 V~ / 50 Hz
Nominal performance
400 Watt
Protection type
IPX8
Pressure port
26,44 mm (¾ “) male
Max. flow rate (Q
max
)
1)
3.200 l/h
Max. pressure
2,4 bar
Max. delivery height (H
max
)
1)
24 m
Max. submersion depth 
7 m
Max. size of the solids being pumped
2 mm
Max. fluid temperature (T
max
)
35 °C
Max. cut-in frequency in one hour
30, evenly distributed
Length of connection cable
10 m
Cable type
H05RN-F
Weight (net)
~ 4.7 kg
Min. self-priming level (A)
2)
45 mm / 40 mm
Min. suction level (B)
2)
4 mm / 1 mm
Cut-in level (C)
2)
600 mm - 250 mm
Cut-out level (D)
2)
60 mm - 170 mm
Dimensions (L x D x H)
16 x 15,5 x 30,0 cm
Item no.
30181
1)
2)
The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
11