3-in-1 Food Processor Instructions for Use
3-in-1 Food Processor TABLE OF CONTENTS Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Safety Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Descriptive Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Your Food Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting Started . . . .
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions carefully before using the appliance. 2. To protect against risk of electrical shock, do not immerse cord, plug or appliance in water or other liquids. 3. Close supervision is necessary when any appliance is used near children. 4. This appliance is not intended for use by children. 5.
IMPORTANT SAFEGUARDS 27. Keep hands and utensils away from the cutting blade while chopping food to reduce the risk of severe injury to persons or damage to the food chopper. A scraper may be used but only when the food chopper is not running. 28. Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps while juicer is in operation. 29. Be sure to turn switch to OFF position after each use of your juicer.
SAFETY RECOMMENDATIONS • Read the instructions for use carefully before using your appliance for the first time: T-fal does not accept responsibility for use that does not comply with the instructions. • Do not leave the appliance running unsupervised, especially when young children or disabled people are present. • Make sure that the power your appliance uses corresponds to your electrical supply system. • Any error in connection will cancel the warranty.Your appliance is designed for indoor home use only.
INTRODUCTION Emeril’s 3-in-1 food processor will revolutionize the way you prep and cook. A major multi-tasker, your new Emerilware™ BAM Machine by T-fal® will chop, slice, shred, mix, blend, juice, emulsify, make dough - and more! Use it to blaze your way to amazing meals. Stainless steel blades and discs can chop, mix and slice in seconds. Meanwhile, 2 speeds plus a pulse button will put you in charge of your daily prepping. The BAM Machine works hard so you won’t have to.
The 3-in-1 Food Processor Description 1. Pusher with measuring marks 1. 2. Lid with feeder tube 3. Transparent bowl 4. Motor shaft 5. Speed selector: position 0-1-2-Pulse 8. 6. Motor unit 7. Storage drawer for accessories 2. 8. Spindle 9. 3. ACCESSORIES (DEPENDING ON MODEL): 10. 9. Metal blade 4. 11. 10. Plastic dough hook 12. 11. Vegetable cutting disc for fine grating/thin slicing (reversible) 5. 12. Vegetable cutting disc for coarse grating/thick slicing (reversible) 13. 13.
USING YOUR FOOD PROCESSOR Getting Started • Before using for the first time, wash all accessory parts in hot, soapy water then dry thoroughly. Or place them in the dishwasher. • Set the motor unit on a clean, dry flat surface. • Plug in your appliance. • For Pulse (intermittent operation): turn the button (5) to the Pulse position and use in short bursts for better control of certain preparations. • For continuous operation: turn the button (5) to the 1 or 2 position. Fig.
USING YOUR FOOD PROCESSOR Mix/Chop/Knead/Blend ACCESSORIES USED • Bowl unit (parts 1, 2 and 3). • Spindle (8). • Metal blade (9) for chopping and mixing. • Plastic dough hook (10) for kneading or mixing ASSEMBLING THE ACCESSORIES (Fig. 6) 1. Place the bowl (3) on the motor unit (6) without locking it. 2. Place the spindle (8) over the motor shaft. 3. Slide the metal blade (9) or plastic dough hook (10) onto the spindle. 4. Place the ingredients in the bowl. 5.
USING YOUR FOOD PROCESSOR Grate/Slice ACCESSORIES USED • Bowl unit (parts 1, 2 and 3). • Spindle (8). • Disc as desired (11 or 12) Fig. 7 ASSEMBLING THE ACCESSORIES (Fig. 7) 1. Place the bowl (3) on the motor unit (6) without locking it. 2. Lock the selected disc (11 or 12) onto the spindle (8). 3. Position the assembly on the motor shaft (4). 4. Put on the lid (2) and lock it on the bowl (3). 5 Turn the assembly to the right to the locked position. 6.
USING YOUR FOOD PROCESSOR Blend/Mix Very Finely ACCESSORIES USED • Blender Assembly (parts 15, 16 and 17). ASSEMBLING THE ACCESSORIES (Fig. 9) 1. Place the ingredients in the blender jug (17) without exceeding the maximum level indicated on the jug. 2. Put on the lid (16) with the measuring cap (15) and lock it on the jug (17). 3. Position the assembled jug (17) on the motor shaft (4), turn to the locking position. 4.
USING YOUR FOOD PROCESSOR Juicing Citrus Fruit ACCESSORIES USED • Citrus Press Unit (parts 18, 19, 20 and 21). ASSEMBLING THE ACCESSORIES (Fig. 10) 1. Slide the citrus press spindle (21) onto the motor shaft (4). 2. Place the juice receptacle (20) on the motor unit (6). 3. Place the filter (19) around the receptacle. 4. Put the cone (18) on the receptacle (20), then turn the assembly to the locking position. 5. To remove the citrus press unit: turn the assembly to the left to release it. Fig.
USING YOUR FOOD PROCESSOR Storing the Accessories Fig. Your food processor is equipped with: a storage drawer (7) which can hold the metal blade (9), the spindle (8), 2 cutting discs (11 and 12) as well as the emulsifying unit (13). Place them in the order and position shown in Figure 12. When the accessories are in place, close the storage drawer (7) into the motor unit (6) as shown in Figure 13. Fig.
CLEANING AND STORAGE Cleaning • • • • Unplug the appliance. For easier cleaning, rinse the accessories immediately after use. Wash and wipe dry the accessories or place them in the dishwasher. Pour hot water containing a few drops of dishwashing washing liquid into the blender (17). Close the lid (16) with its measuring cap (15) on. Give a few pulses. Unplug the appliance. Rinse the jug. • Never immerse the motor unit (6) in water, or run water over it. Wipe it clean with a damp sponge.
ONE YEAR LIMITED WARRANTY The manufacturer warrants this product to be defect free in material and workmanship for a period of one year from the date of purchase. Defective products may be returned by the original purchaser or any subsequent owner within the warranty period, postage pre-paid together with proof of purchase (register receipt) to an authorized T-fal return facility.
ONE YEAR LIMITED WARRANTY What happens to my return? If the inspection shows that the product is defective, under our Limited Warranty, the return facility will notify T-fal to replace the defective part or product at no cost to you. Comparable substitutions are based on replacement product availability and at the sole discretion of the Manufacturer. If the inspection shows that the product is not defective under our Limited Warranty we will notify you.
