Mounting Instruction

SCREWING DIFFUSERS
These instructions are for the following products: Spectrum D10, Spectrum D20, Spectrum D30, Spectrum D40, SC Diuser.
Open the package carefully! Inserting sharp objects
into the package can damage the diuser. Avoid
using long, sharp tools for opening the package!
UNBOXING
While determining the mounting positions, it helps
to mark the walls and ceiling using a level and
tape measure, in order to achieve even spacing in
relation to corners and sound sources.
DETERMINE THE POSITION
Carefully remove the products from the
package and remove the protective lm.
Also remove the drilling template and
mounting clips and set them aside.
REMOVE PRODUCTS
FROM PACKAGING
MOUNTING INSTRUCTIONS
The following tools are needed for installation:
✓ Box Cutter/ ✓ Folding ruler or ✓ (Electric) Screwdriver
utility knife tape measure ✓ Anchors (6-8)
✓ Level ✓ Electric drill ✓ Screws
✓ Pencil ✓ Drill bits
Make sure to use the correct type of anchors for your
mounting surface (drywall, masonry, concrete, etc.).
TOOLS
EN