Mounting Instruction

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

DocID: 438567_438532_438516_492433_371042_23.03.2021

Align the drilling template on the wall. Use the

template to mark the drilling locations using a

pencil. Then drill the holes.

MARK AND DRILL HOLES

USING THE TEMPLATE

Insert anchors into the holes and use screws to rmly

attach the four mounting clips for installing the diuser.

INSERT ANCHORS,

SCREW IN MOUNTING CLIPS

Now you can attach the diuser to the mounting

clips by pressing it evenly onto the four clips. Repeat

this process for any additional diusers. That’s it!

ATTACH DIFFUSER

Make sure to examine the condition and load carrying capacity of the wall before installation.

TIP:

This product is intended to be used to optimise the room acoustics. Any other use or use un-

der other operating conditions is considered to be improper and may result in personal inju-

ry or property damage. No liability will be assumed for damages resulting from improper use.

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within

reach of babies and young children. Choking hazard!

For the transport and protective packaging, environmentally friendly materials have

been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-

ckaging, etc. are properly disposed of. Do not just dispose of these materials with

your normal household waste, but make sure that they are collected for recycling.

Please follow the notes and markings on the packaging.

Find more solutions for

your room on our website:

www.takustik.com

Share your installation

with us on Instagram:

www.takustik.com/instagram

Find more installation

guides on YouTube: