Mounting Instruction

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 470199 _19.03.2021
MOBILE WALL
Open the package carefully! Inserting sharp objects
into the package can damage the mobile wall. Avoid
using long, sharp tools for opening the package!
UNBOXING
The absorber elements (1,2,3) have an opening in
the back for sliding the elements onto the pole.
Add the elements to the stand one at a time.
That’s it!
Depending on the application, you can modify the
height of the mobile wall by using the desired number
of elements.
MOUNT THE ABSORBERS
Carefully remove the products from the package.
Place the foam elements (3), base plate (1), pole
sections (3) and threaded couplings (3) next to
each other on the oor.
REMOVE PRODUCTS
FROM PACKAGING
Connect the pole elements using the threaded
couplings and attach them to the base plate.
ASSEMBLE THE
BASE AND POLE
MOUNTING INSTRUCTIONS
EN
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube