Mounting Instruction

DIFFUSER
MOUNTING INSTRUCTIONS
These instructions are for the following product: Grid.
Insert the supplied anchors into the drilled holes
and x two suitable screws in the anchors.
INSERT ANCHORS
AND SCREWS
While determining the mounting positions, use a level
and the supplied drilling template to mark the wall
through the holes in the drilling template.
Drill the holes.
DETERMINE THE POSITION /
MARK AND DRILL HOLES
The following tools are needed for installation:
✓ Cutter ✓ Electric drill ✓ Anchors (2 × 6 mm)
✓ Level ✓ Drill bits ✓ Screws
✓ Pencil
Make sure to use the correct type of anchors for your
mounting surface (drywall, masonry, concrete, etc.).
EN
Open the package carefully! Inserting sharp objects into
the package can damage the diuser. Avoid using long,
sharp tools for opening the package!
Carefully remove the products from the package and
read the mounting instructions carefully. Remove the
drilling template and set the diusor aside.
UNBOXING +
REMOVE PRODUCTS
TOOLS