Mounting Instruction
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 340339_25.03.2021
Put the wood blocks on the base plate according to the
size and the position as shown in the following installa-
tion pattern. You can tap the wood blocks gently with the
rubber hammer. That‘s it!
PUT ELEMENTS
ON THE PLATE
EN
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Fix the base plate straightly to the wall. Use the base
plate to mark the drilling holes by marking the wall at
the dened points (see installation pattern) with the
pencil.
Drill the holes.
DRILLING HOLES
Insert the dowels into the drilled holes and fasten the
base plate with four screws to the wall.
Note the side marking on the backside of the base plate.
Align the base plate using a level.
INSERT DOWELS +
MOUNTING PLATE
Installation pattern
Prior to installation, it is imperative to check the load capacity and
the condition of the wall.
TIP:
✓ Material: beech plywood (base plate)
beech, colourless lacquered (wood blocks)
✓ Eective frequency: approx.900 - 3650Hz
✓ Easy assembly and disassembly
✓ Dimensions (W×H×D): approx. 600 × 170 × 600mm
✓ Weight: approx. 30 kg
✓ Scope of delivery:
• 48 wood blocks with a height of 4cm
• 44 wood blocks with a height of 8cm
• 46 wood blocks with a height of 12cm
• 15 wood blocks with a height of 16cm
• 1 × base plate
• 155 × wooden pins
= 6 mm holes for screws
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube