Mounting Instruction

MOUNTING INSTRUCTIONS
DIFFUSOR MANHATTAN
These instructions are for the following products: Manhattan EPS.
Open the package carefully! Inserting sharp objects
into the package can damage the diuser. Avoid
using long, sharp tools for opening the package!
UNBOXING
For assembly, place the two brackets (element K) next to each
other and add the various elements to both at the same time,
in the order specied in the instructions:
A - G - I - C - J - B - D - H - E - F - A - B
Then, apply light pressure to each element to put them in
place. Take care while adding the elements to the bracket and
avoid using excessive force.
ASSEMBLE TWO DIFFUSERS
AT THE SAME TIME
Carefully remove the products from the package and
read the instructions. Then remove the various elements
and stack them alphabetically in 2 groups, according to
the letters A to J referenced in the instructions.
Tip: It’s easiest to remove four stacked elements from the
package at a time!
REMOVE PRODUCTS
FROM PACKAGING
The following tools are needed for installation:
✓ Box Cutter ✓ Level
✓ Caulk Gun ✓ Folding ruler or tape measure
✓ Pencil ✓ t.akustik glue
We recommend using our t.akustik glue for installation.
TOOLS
The elements are nested in the package and must be removed carefully. Sorting the individual parts is easiest when fourstacked elements are
removed from the package at the same time.
TIP:
EN