Mounting Instruction

MOUNTING INSTRUCTIONS

ABSORBER

These instructions are for the following product: PET Absorber Plate ex 140

Open the package carefully! Inserting sharp objects

into the package can damage the absorber. Avoid

using long, sharp tools for opening the package!

UNBOXING

Carefully remove the products from the package and

read the mounting instructions carefully. Remove the

mounting accessories and the absorber remove the

protective lm of the absorber.

REMOVE PRODUCTS

FROM PACKAGING

Slide the two feet onto the absorber at the desired

position.

FIXING THE FEET

Place the absorber on the feet onto the table or on the

oor.

PLACING THE ABSORBER

For further types of application, as for example the wall or ceiling mounting, other brackets are optionally available.

TIP:

PAGE 1
EN MOUNTING INSTRUCTIONS ABSORBER These instructions are for the following product: PET Absorber Plate flex 140 UNBOXING Open the package carefully! Inserting sharp objects into the package can damage the absorber. Avoid using long, sharp tools for opening the package! REMOVE PRODUCTS FROM PACKAGING Carefully remove the products from the package and read the mounting instructions carefully. Remove the mounting accessories and the absorber remove the protective film of the absorber.
PAGE 2
Find more solutions for your room on our website: www.takustik.com Share your installation with us on Instagram: www.takustik.com/instagram This product is intended to be used to optimise the room acoustics. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. Ensure that plastic bags, packaging, etc.