User's Manual

SZZJ-A10~17LF-LCPA User
Manual
- 29 -
FURTHER INFORMATION ON SIGNAL BOOSTER END-USE REGISTRATION
A subscriber must have the consent of a wireless-services provider to operate a Consumer Signal Booster.
Subscribers may obtain provider consent in a variety of ways. For example, AT&T, Sprint, T–Mobile,
and Verizon Wireless have voluntarily committed to allow their subscribers to use properly certificated
Consumer Signal Boosters (i.e., boosters that meet the new rules) on their networks. Also, a signal
booster manufacturer could seek authorization for use of a particular booster model on behalf of all
subscribers of specific providers. Alternatively, a provider may specify a testing protocol that if satisfied
would result in licensee consent to specific booster models. A subscriber may also seek a licensee’s
express consent to operate a signal booster, e.g., by phone call or e-mail.[R11]
Public Notice DA 16-137 [R28] gives listings of Consumer Boosters that have received FCC certification
as of February 2, 2016.
The following selected information about wireless providers’ Consumer Booster registration mechanisms
supplements the requirements and information given in Sections 20.21, 22.9, 24.9, 27.9, and the FCC
Signal Boosters website (http://wireless.fcc.gov/signal-boosters/).
• Sprint Nextel will allow consumers to register their signal boosters by calling their toll-free number.
They have already trained their calling center and have designated an engineer to handle inquiries.
They may eventually allow consumers to register on their website but they want to gauge how the
process works via phone first.
• T-Mobile online registration link: (www.T-Mobile.com/BoosterRegistration);
(https://saqat.t-mobile.com/sites/SignalBooster#).
• Verizon’s online registration link:
(http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html).
• AT&T will allow online registration and will inform OET Lab with the weblink when it is ready.
• U.S. Cellular (http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp).
10. ISED Warning
ISED Statement
Operation is subject to the following two conditions:
⚫ This device may not cause harmful interference.
⚫ This device must accept any interference received, including interference that may cause undesired operation.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement
ISED Radiation Exposure Statement:
This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.