User's Manual

WIFI Alarm System
13
WIFI Alarm System
12
As shown in the figures below:
10.4.2 Mobile APP controls the host to learn detectors
EnterSystem Settings" menu
Press "Detector Setting", enter the detector setup interface, APP would obtain the
quantity of detectors already learnt with the host.
Press the "Add Devices" button to enter the detector coding interface.
Press "Detector Name"column, select one name for the detector which is waiting
for coding
Press" Zone Mode" column, select the zone type required by corresponding
detector
Press the "Learning" to send command to the host
Trigger the detector to finish coding .Then the host sends message to APP to show
it's coded successfully
APP pops up “Learn OK, coding is finished
APP returns to detector setup interface, and obtains again the detectors coded and
its quantity learnt with the host
As shown in the figures below: