User's Manual

WIFI Alarm System
23
WIFI Alarm System
22
13.2 Stay Arm
Remote control operation: press Arm key on the remote control at home ].
SMS Operation: Send SMS 1234zj , “1234” stands for the user's password. The host
will reply to the controlling phone with a message saying "Stay Arm success!".
APP Operation: In the main menu, press the "Stay Arm" icon for 3 seconds, the
device will return to stay Arm successfully, APP’s middle state icon is updated as Stay
Arm.
Host Tip: 3 LED lights flash in turn for 1 second, the buzzer makes short beeps twice,
and the red indicator light starts breathing display. If the "Arm / Disarm SMS
notification switch" has been open in the setting, the host will send a message
saying "Home Arm success" to the preset telephone.
[
In home Arm state, only stay arm’s effective defense zone is into alert state, if the zone is triggered at 
this time, the control panel generates a local sound and light alarm, and send alarm messages and make
phone calls to a pre-set alarm phone number, meanwhile push alarm message to the phone APP, and
send alarm information to the network control center.
As shown in the figures below:
13.3 Disarm
Remote control operation: Press the [ ] button on the remote control to disarm.
SMS Operation: Send SMS 1234cf , “1234” stands for the user's password. The host
will reply to the controlling phone with a message saying "disarm success!"
APP Operation: In the main menu, press "Disarm" icon for 3 seconds, the device will
return to disarm successfully, APP’s middle state icon is updated as disarm.
Host Tip: 3 LEDs flash twice slowly, the buzzer makes a long beep once, after disarm,
all alarms would be stopped, the host will be back to normal state. If the "Arm /
Disarm SMS notification switch" has been opened in the setting ,the host will send a
message saying"disarm success" to the preset phone number.
As shown in the figures below: