User's Manual

WIFI Alarm System
19
WIFI Alarm System
18
Note:All examples below with default engineer password “6666
1) Control host into learning status setting format A,B
A is for setting detector name,0-11” O-others, 1-gate, 2-hall, 3-SOS, 4-bedroom,
5-window, 6-balconies, 7- perimeter, 8-smoke, 9-gas, 10-carbon monoxide,
11-water leak. B is for setting defense zone type, “0-11t, 0- stay arm , 1- out arm ,
2 -24-hour zone , 3- close all corresponding defense zones.
Example:
The detector name is hall and defense zone is out arm,set SMS“ *6666*232,1* ”
When host receives this SMS,it will enter learning status and trigger detector within
20s,then host will automatically name this detector “hall(only valid for out arm).
2) Delete detector
Example:
Delete all namedwindow” detector,set SMS to be“ *6666*245* ”.
3) Auto Arm/Disarm setting format: HHMM,hhmm
HHMM is disarm time(hour,minute),hhmm is arm time(hour,minute)
Example:
Set disarm time is 8:20,arm time is 20:30,turn on auto arm/disarm switch, set SMS
“ *6666*411*420820,2030* ”.
4) Parameter initialization:Reserve all learned remotes and detectors ,
     
the remaining restore factory settings,set SMS “ *6666*43* ”.
xxxxxxxxxxx is phone number ( up to 19 ), A is alarm voice dialing switch (1- ON , 0 -
OFF), B is the alarm SMS switch (1 -ON , 0 -OFF) .
Example:
Set two alarm phone numbers ,number 13912345678 to receive voice dialing and
SMS , number number 075 581 234 567 only receive voice dialing , then set SMS:
*6666 *5113912345678,1,1*52075581234567,1,0*.
5) Alarm Phone Number Setting format xxxxxxxxxxxA,B
aaa,bbb,ccc,ddd is IP address,xxxxxis port number,intermediate must be isolated
with commas
Example:
Set GPRS network server IP address 120.24.237.164, port number is 2001 , then set
SMS *6666*90120,24,237,164,2001* .
6) IP Address Setting Format aaa,bbb,ccc,ddd,xxxxx
Host support to name host in(up to 20 characters), prefix alarm messages for easy
identification of specific host or alarm location.
Set SMS: 1234mz,xx district, building , “1234” is user password, “xx district, buildingis
the setting name
12.3 Remote SMS setting of host name
12.4 Remote SMS query of parameters set
12.4.1 Query system setting
SMS format *6666*62*
SYSTEM set:
SN:
ENGINEER PASSWORD:
USER PASSWORD:
GSM CSQ:
WIFI RSSI:
SMS format *6666*90*
SYSTEM set2:
APN:
GPRS IP:
NTP IP:
12.4.2 Query system setting 2