User's Manual

WIFI Alarm System
16
12.Parameter Setting and Query
User can set or query host parameters by SMS or mobile app
12.1 App query and parameter setting: function switch
setting, alarm phone setting, entry delay setting
After setting the desired function in setup interface, pressFinish
button,App sends setting command to the host.After setting up, user return
to the setting interface again with updated contents
As shown in the figures below:
12.2 Remote SMS setting of parameters
Users only need to edit SMS with the following format and send to the host
SIM number to complete the setting.
One setting SMS can obtain multiple setting addresses and contents,but must isolate
them with *,head and tail must end with*,each address must be two digital,or may
occur unexpected setting results.One setting SMS can not be more than 160
characters.We recommend set one SMS with all needed contents.
WIFI Alarm System
17
Null
Null
Null
Null
SN will roll up with
the updating of new
software
once
once
Null
Null
Null
Null,Refer to annotation 4