User's Manual

（2）Press【
】or【 】， select “Remote & Keypad”, and press【 】to confirm.
（3）Press【
】or【 】, select “RC 01-10” by turn, and press 【 】to confirm.
（4）Press【
】or【 】, select “Add”, and press【 】to enter into coding. LCD display shows
“Synchronize”,
（5）Press any key of remote or keypad to let it transmit a wireless signal to alarm host. Then the
alarm host beep once, indicates coding is successful. If beep twice and display “Already added” on
LCD,it indicates repeated coding.
Note 1: After coding, it will display “control” on second line, if still display “empty”, it means
coding failed.
Note 2: For coding wireless keypad, user also need to enter password of wireless keypad, then press
“Arm” or “Disarm” key to transmit wireless signal to host.
3.1.2 Delete single remote&keypad
If user needs to delete a coded remote or keypad, please select "Delete" in step (4), and press 【
】
to confirm.
3.1.3 Delete all remote&keypad.
(1) Enter into menu setting, press【 】or【 】, select “Accessories”, and press 【 】to
confirm.
(2) Press【 】or【 】， select “Remote & KeypadDelete All？”, and press【 】to confirm.
(3) The display will show “Sure?”, press 【
】to delete, or press 【 】 to cancel.
3.2 RFID tag settings
3.2.1 Add RFID tag
(1) Enter into menu setting, press【 】or【 】, select “Accessories”, and press 【 】to
confirm.