User's Manual

When alarm, the alarm host dial the pre-set phone numbers, users pick up the phone, and remotely
control by commands (please refer to the command list)
6.3.2 Dial the alarm host number to remotely control
(1)Dial the host number with any telephone, after connect, the panel will beep once.
(2)Enter administrator Password，press【
】to confirm. After the panel beeps once, then you can
remotely control by command.
(3)If user enter into wrong password by 3 times the panel will hang up.
(4)Enter command based on your need (please refer to the command list). If no operation in 30
seconds, the system will hang up the phone.
6.3.3 Command list of Telephone remote control.
Phone button Function Meaning
Press【1】 Out arm The phone sound “System armed”
Press【2】 System disarm The phone sound “system disarmed”
Press【0】 Home arm The phone sound “System armed”
Press【3】 Monitor Monitor the local voice
Press【4】 Bilateral intercom Intercom
Press【5】 Open the siren Deterrent intruder
Press【6】 Close the siren siren stop ring
Press【*】 Play the record of voice Play the record of voice
Press【Hang
Up】
Exit telephone remote control, hang
up
Hang up directly
Chapter 7 Maintenance and Troubleshooting
7.1 Maintenance
The alarm host has an excellent design and process, please use with care. The following
recommendations can help you fulfill warranty obligations and extend the service life of the product.
(1) Please keep the alarm host out of reach of children.
(2) Please keep the alarm host dry. Rain, moisture, and various liquids might contain minerals, will
corrode electronic circuits.