User's Manual

4.9 Ring times
Ring times means the times of host ringing before it take the phone call by preset phone numbers. Its
default value is 6 times.
(1) Enter Menu Setting, press【
】or【 】，select “System Settings”, press【 】key to confirm.
(2) Press【
】or【 】， select “Ringing Times”, press【 】key to confirm.
(3) Input (0-9) times, press【 】key to confirm.
4.10 Cycle Call times
Cycle call times means the times of alarm host calling the preset phone numbers by circle when
alarm. Its default value is 6 times.
(1) Enter Menu Setting, press【
】or【 】,select “System Settings”, press【 】 to confirm
(2) Press【
】or【 】, select “Call Times”, press【 】 to confirm
(3) Input (0-9) times, press 【 】 to confirm
4.11 Siren Setup
The built-in siren is with the alarm host, wired siren, wireless siren need to connect to alarm host by
wire or wireless signal. User can set their alert/sound time and turn them on/off.
4.11.1 Set alert/sound time for all sirens.
The unit of siren sound time is minute, the default value is 5 minutes, if set “0”, the siren will not
sound.
(1) Enter into Menu, press【
】or【 】， select “System Settings”,press【 】to confirm.
(2) Press【
】or【 】， select “Siren Setup”,press【 】to confirm.
(3) Press【
】or【 】， select “Siren alert time”,press【 】to confirm.
(4) Input siren ringing time (0-9)，press【
】to confirm.