User's Manual

(2) Press【
】or【 】， select “Access password”, press【 】key to confirm.
(3) Press【
】or【 】， select “Admin password”, press【 】key to confirm
(4) Input 4 digits Password, Press【 】to confirm.
Warm Prompt：If you forget your Administrator password, and can’t set the panel, please contact
with your dealer.
4.8.2 User Password
With user password, user can disarm alarm host by keypad, or remotely control host by phones. Its
default value is 2222.
(1) Enter Menu Setting, Press,【
】 or【 】,select “System Settings”, press【 】key to
confirm
(2) Press【 】or【 】, select “Access password”, press【 】key to confirm.
(3) Press【
】or【 】, select “User password”, press【 】key to confirm.
(4) Input 4digits Digital Password, press【 】to confirm.
4.8.3 Coercion Password
In emergency, when user is forced to disarm the system, user can enter the coercion
password to disarm, but host will call the preset phone numbers secretly. Its default
value is 3333.
(1)Enter Menu Setting, press【 】or【 】, select “System Settings”, press【 】key to confirm.
(2)Press【
】or 【 】， select “Access password”, press【 】key to confirm.
(3) Press【
】or【 】， select “Coercion password”, press【 】key to confirm.
(4)Input 4 digits digital code, press【
】key to confirm.