User's Manual

(4)Input your local(current) time，press【
】key to confirm.
Please reset the time with the recovery of power supply.
4.2 Entry/Exit Delay
By setting this functions, the alarm host will ignore the delay sensor in the exit/entry delay time, wait
for user exiting or entering the house; after the delay time, the delay sensor will work normally and
can trigger host to alarm. About the delay sensor, please refer to 3.3.2.
4.2.1 Entry Delay setting
Entry Delay, also called Alarm Delay, by setting this function, the alarm host will ignore the delay
sensor in the entry delay time after triggered by the delay sensor, wait for user entering to disarm the
host.
(1) Enter menu setting, press【
】or【 】,select “System Settings”,press【 】key to confirm
(2) Press【
】or【 】,select “Entry Exit delay”,press【 】key to confirm
(3) Press【
】or【 】,select “Entry delay”, press【 】key to confirm.
(4) Input time for delay, press【
】key to confirm
The default value is 200s, the value range is 0~255s.
4.2.2Exit Delay setting
Exit delay, also called arm delay, by setting this function, the alarm host will ignore the delay sensor
in the exit delay time after armed, wait for user exiting the house.
(1)Enter Menu Setting, press【
】or【 】,select “System Settings”,press【 】key to confirm.
(2) Press【
】or【 】,select “Entry Exit delay”, press【 】key to confirm.
(3)Press【
】or【 】,select “Exit delay”, press【 】key to confirm.
(4)Input the time for delay, press【
】key to confirm.
The default value is 200s, the value range is 0~255s.
Notes: In the exit delay time, the host will beep to remind user exiting, in the last 5 seconds, it will