User's Manual

normally and can trigger host to alarm. User need to set entry/exit delay time in advance. Please
refer to 4.2.
Home Sensor：
Sensors of home defense zones. The home sensors protect the living areas of the house like living
room, bedroom, the alarm host will ignore the home sensors if user stay arm the host but activate
other sensors.
3.3.3 Name wireless sensors
(1) Enter into menu setting, press【 】or【 】, select “Accessories”, and press 【 】to
confirm.
(2) Press【 】or【 】， select “Wireless Sensors”, and press【 】to confirm.
(3) Press【
】or【 】, by turn select “Sensor (01~99)”, and press 【 】 to confirm.
(4) Press【
】or【 】, select “Edit name”, press【 】to confirm, and input the name of the
sensor.
3.3.4 Delete a single sensor
If user needs to delete a coded sensor, please select "Delete" in step (4), and press 【 】to confirm.
3.3.5 Delete all sensors
(1) Enter into menu setting, press【 】or【 】, select “Accessories”, and press 【 】to
confirm.
(2) Press【 】or【 】， select “Wireless SensorsDelete All?”, and press【 】to confirm.
(3) The display will show “Sure?”,press 【
】to delete, or press 【 】 to cancel.