User's Manual

(1) Enter into menu setting, press【
】or【 】, select “Accessories”, and press 【 】to
confirm.
(2) Press【 】or【 】， select “Wireless Sensors”, and press【 】to confirm.
(3) Press【
】or【 】, by turn select “Sensor (01~99)”, and press 【 】 to enter into coding.
(4) Press【
】or【 】, select “Add”, and press【 】to enter into coding. LCD display shows
“Synchronize”
(5) Trigger the sensor and let it transmit wireless signal to alarm host, then the alarm host beep once,
indicates coding is successful. If beep twice and display “Already added” on LCD, it indicates
repeated coding.
3.3.2 Edit sensor type
(1) If user needs to edit sensor type, please select “Edit type” in step (4). Press【 】or【 】,
select “Normal Sensor/24 Hour Sensor/Delay Sensor/Home sensor”, then press【
】 to confirm
type of the sensor.
(2) Description of sensor types:
Normal Sensor:
Sensors of normal defense zone. The normal sensors can trigger alarm host to alarm only when it is
armed, won’t trigger alarm if disarmed.
24 Hour Sensor:
Sensors of 24 hours defense zone. No matter what status the system is in, 24 Hour Sensor can trigger
host to alarm.
Delay Sensor:
Sensors of delay defense zone. The alarm host will ignore the delay sensor in the entry/exit delay
time, wait for user entering or exiting the house; after the delay time, the delay sensor will work