User's Manual

Operation keyboard: Main Menu Timer Disarm Timer
Operation keyboard: Main Menu Timer Arm Timer
Press to select Timer, then press the backspace key to delete
the original time.
Input the 4-digit scheduled arm time (Hour: Minute).
Press to select Switch, and press to select "On/Off".
Press to confirm, the alarm host displays "Setting OK" to complete
the setting.
Operation keyboard: Main Menu Record Record and Play
At first the alarm host will display “Busy and waiting please”, when it changes
to “Recording”, it means start to record voice.
After recording is finished, the alarm host displays “Playing”and starts
automatic playback.
After playback is finished, press to save. The alarm host displays “Please
wait saving”. After a few seconds, “Setting OK”appears, then recorded voice is
saved.
Operation keyboard: Main Menu Parts Siren Learn Enter
Press and hold the Set button on the siren until 2 sound is heard. The siren’s
indicator will flash quickly, then it enters into synchronization status.
Press to confir the alarm host displays “Learn Signal Sent” and send
wireless signal to the siren.
A long and a short sound arise from the siren, which means successful
synchronization.
m,
Operation keyboard: Main Menu Parts Del RFID Enter
The alarm host displays “Delete RFID all”, meanwhile all stored RFID card’s
number is displayed in the dialog window.
Press to confirm, the alarm host displays “Setting OK”, all RFID cards are
deleted.
Operation keyboard: Main Menu Parts Add RFID Enter
The alarm host displays "Synchronize" and enters into the 20- seconds
countdown dialog window waiting for the RFID card synchronization. Put the
RFID card close to the sensitive area on the down-right corner of the alarm
host.
The alarm host displays "Learning OK", then the RFID card is successfully
added.
If the alarm host displays “Device code has been learnt”, it means this RFID
card is already added to this alarm host.
Press confirm The alarm host displays "Synchronize" and enters into the
20- seconds countdown dialog window waiting for the wireless detector
synchronization.
Trigger the wireless detector to launch wireless signal to the alarm host.
The alarm host displays "Learning OK", then the wireless detector is
successfully added.
If the alarm host displays “Device code has been learnt”, it means this
wireless detector is already added to this alarm host , please use other
wireless detector to try again.
Record alarm voice
Arm Timer
Disarm Timer
!
Add/Delete RFID card
Add
Operation keyboard: Main Menu Parts Delete Detector Enter
The alarm host displays “Delete detector all”, meanwhile all stored detector’s
number is displayed in the dialog window.
Press to confirm, the alarm host displays “Operation OK”, all wireless
detector and doorbell are deleted.
This operation instruction is subject to our company model PE-519 wireless siren.
After the wireless siren is synchronized with the alarm host, if the alarm host triggers alarm,
alarm sound will arises from the siren at the same time.
11
10
Delete
Delete
Synchronization with external wireless siren
Record
The user can record 20-seconds voice. If alarm occurs, the alarm host will dial
preset phone number and play this record alarm voice.
Timer
The users can set automatic arm/disarm time according to their own routine time,
avoiding repeated operation or missed arm/disarm.
Press to select Timer, then press the backspace key to delete
the original time.
Input the 4-digit scheduled disarm time (Hour: Minute).
Press to select Switch, and press to select "On/Off".
Press to confirm, the alarm host displays "Setting OK" to complete
the setting.
INITIAL USAGE INITIAL USAGE