User's Manual

Note: 1. When the main keyboard is unlocked, if the user does not do any action or directly
*
press Key, then the keyboard is locked. After the keyboard is locked, the user
needs to input password before using the keyboard.
2. When keyboard backlight is off, if the user does not do any action under main interface,
or directly press key, then the backlight is off to save power.
3. When certain language is selected, then the operation voice reminder, display and
alarm SMS all are converted to this language. The alarm host will restart when
language selection is confirmed.
76
Menu structure
Delay
Switch
Exit Delay
Entry Delay
Set Exit delay,refer to “Identification for daily operation”
Unit: second,Range:0~65535,Default: 40 seconds
Set Entry delay，refer to “Identification for daily operation”
Unit: second,Range:0~65535,Default: 30 seconds
Siren Duration
Unit:minute,Range:0~65535,Default: 3 minutes
Set siren duration
Arm Beep
Siren
Arm SMS
Keypad Lock
Backlight
System
User
简体中文
Set arm beep
Select: On/Off, Default: Off
Set Siren
Select: On/Off, Default: On
Set Arm/Disarm SMS
Select: On/Off,Default: Off
Set keypad to be locked or not
Select: On/Off,Default: Off
Set keypad backlight to be on or off
Select: On/Off,Default: Off
Set system password
Range: 0000-9999, 4 digits, default: 6666
Set user password
Password
Language
Initialization
Reset
1st Phone
2nd Phone
3rd Phone
4th Phone
5th Phone
English
Deutsch
Restart alarm host
Set system Initialization, refer to “Initialization”
Set 1st phone number, Dial on/off, SMS on/off
Set 2nd phone number, Dial on/off, SMS on/off
Set 3rd phone number, Dial on/off, SMS on/off
Set 4th phone number, Dial on/off, SMS on/off
Set 5th phone number, Dial on/off, SMS on/off
Refer to
“Phone number
setup”
Phone
Log
Alarm Log Inquire alarm log history
Arm Log
Inquire arm/disarm log history
Parts
Add Remoter
Learning new remote control
Del Remoter Delete all remote control
Refer to
“Add/Delete
remote control”
Add Detector
Learning new wireless detector
Del Detector Delete all wireless detectors
Refer to
“Add/Delete
wireless
detector”
Add RFID
Learning new RFID card
Del RFID Delete all RFID cards
Refer to
“Add/Delete
RFID card”
Siren Learn
Send 1-second wireless learning
signal to external wireless siren.
Refer to
“Synchronization
with external
wireless siren”
WiFi
Airlink
Set alarm host into wireless
network configuration(via APP)
Unbind
Unbind alarm host with mobile
phone APP
Refer to
“unbind mobile
phone APP
with alarm host”
Refer to
“Voice record”
Record
Record
Play
Record and playback
Play current recorded voice
Delete Delete current recorded voice
Arm Timer
Timer
Set daily arm time and switch on/off
Disarm Timer
Set daily disarm time and switch on/off
Refer to
“Clock/Timing”
Zone & Sync
Set the country or region’s standard Greenwich time
difference, which is synchronous to internet time.
Default time zone: +08:00.
Version
Inquire firmware version, serial number, server.
MENU
Setting
Main menu
ALARM HOST APPEARANCE AND ACCESSORIESALARM HOST APPEARANCE AND ACCESSORIES
Range: 0000-9999, 4 digits, default: 1234
Simplified Chinese(Default)