User's Manual

Identification for daily operation
Arm
Stay Arm
Disarm
Trigger
Exit delay
Entrance delay
Alarm
set security task (i.e. Anti-burglar), make the host into alert state, also known as
Arming, Alert or Booting. Designate security guard mission(i.e. Anti burglar), set
the alarm host into on-guard status, also called Arming Alert or Power on.
In case the user is at home, only set alert to entrance/exit or perimeter, also
called home alert.
Withdraw security task(i.e. Anti-burglar), also called Withdraw alert or Power off.
Under Arm state, detector detects someone or door is opened, it will trigger the
detectors and make alarms.
After setting the host to be Arm state, in order to avoid making alarms for the
users leaving and passing the Arm zones, delay the alarm time.
When user comes back and pass the Arm zones, the host will not immediately
make alarms. It will allow user to Disarm the host with some time; the host will
make alarms if time out beyond the Disarm.
When the host create alarm action, acousto -optical alarm signal arises. The host
will send SMS message to the preset mobile phone, dial the preset user
telephone number, create push to mobile phone APP, or send alarm information
to intranet security center.
,
Top view
Alarm host appearance and accessories
ARM/
*
DISARM/
#
TFT display screen
Dial key
Previous/Function
key
Next/Backspace
key
Return/Cancel key
Enter Key
Disarm key
Arm key
Stay arm key
SOS key
Bottom view
Anti-tamper switch
32
OVERALL STATE ALARM HOST APPEARANCE AND ACCESSORIES