User's Manual

When any alarm is triggered, the alarm host will send SMS to preset phone numbers
as following contents:
!
The alarm host supports diverse alarm types. When alarm is triggered, it will send
alarm SMS to the user’s mobile phone and push alarm message to APP,
simultaneously send alarm message to GPRS alarm center and make calling to the
user, then the user can do on-time monitoring and remote operation.
The alarm host also support following alarm types,
 The main power malfunction(when main power malfunction lasts for 5 seconds,
the alarm is activated)
 Back up battery shortage(In case of main power malfunction, when back up
battery’s voltage is lower than 3.45V and lasts for 10 seconds, the alarm is
activated)
 Main power recovers.
Anti-tamper alarm(When the mounting bracket is separated with the alarm host,
the alarm is activated).
<The alarm hostt name>:
Current alarm
Automatic dialing preset phone number when the
alarm host alarms
21 3
When any alarm is triggered, the alarm host will send alarm message to GPRS
alarm center. The alarm center can handle the alarm quickly after receiving and
confirming the alarm message.
27
26
SMS alarm
Alarm and remote monitoring
Voice alarm and remote monitoring
When any alarm is triggered, the alarm host will automatically dial preset phone
numbers(make sure the dial switch is on). After the user ringed, the alarm host will
play current alarm type at first. If there is a preset voice, this voice will be played.
Then the user will hear reminding voice “Press 1 to arm, press 2 to disarm, press 3
to monitor, press 4 to talk . If it is mistake alarm, the user can press “2” to activate
Disarm. The user also can press “3” or “4” to turn off the alarm sound for better
monitoring. If monitoring is unnecessary, just quit calling.
If the user does not answer the call or failed calling, the alarm host will constantly
dial the preset phone number according to the preset redial times until the user
answers the call.
”
Preset phone number to call alarm host
If the preset phone number voluntarily calls the alarm host, the alarm host will
automatically answer the call, then the user can do on-time monitoring and remote
operation.
Alarm receiving procedure via APP
When any alarm is triggered, the alarm host will push alarm message to mobile
phone at first. Open APP and enter into main menu, the user can see a red alarm
icon in the middle status bar and the current alarm type. The user can select “Alarm
Log” icon to inquire all operation record and alarm log.
Receiving alarm by Intranet monitoring center
Refer to below diagram:
The function is only valid when the IP address is correctly set. Proper APN setting is
required for foreign countries. Please refer to “SMS parameter setup” for details.
ALARM AND REMOTE MONITORING ALARM AND REMOTE MONITORING