User's Manual

Enter into “system settings”, and select “Wireless Siren Setting”.
Click “Trigger”, APP will send wireless signal to the alarm host.
“Trigger OK” appears, the synchronization is finished.
Synchronize external wireless siren via APP
21 3
21 3
87
Delete remote control via APP
Enter into Remote Setting and press icon.
Click OK to finish deletion in Delete remote controller all popup window
APP returns to Remote Setting menu, then remote number will be zero.
“ ” “ ”
“ ” “ ” .
“ ”
?
21 3
17
16
Delete detector via APP
Enter into “Detector Setting” menu, press “ ”icon which you wan to delete
A window “Delete Detectors named....appears, click “OK” to finish deletion.
APP returns to “Detector Setting” menu, the deleted detectors will not be listed
in this interface.
.
Refer to below diagram:
This operation is only to send synchronization signal via APP to external wireless
siren which is being learnt. Refer to “Synchronization with external wireless
siren”.
Refer to below diagram:
MOBILE PHONE APP MOBILE PHONE APP
Number of
learnt detector
If number is 0,
it means delete
successfully
Refer to below diagram: