Quick Start Guide

ManualsBrandsSZ DJI TECHNOLOGY ManualsCamera & PhotoCamera Drone

Camera DroneQuickStartGuide

V1.02020.07

Aircraft

DJIMini 2features Obstacle Sensing and Infrared Sensing System

, and a fully stabilized 3‐axis

gimbalwitha1/2.3”CMOSsensorcamerathatshoots4Kvideoand12‐megapixelphotos.

1. GimbalandCamera

2. PowerButton

3. BatteryLevelLEDs

4. DownwardVisionSystem

5. InfraredSensingSystem

6. Motors

7. Propellers

Summary of content (8 pages)

PAGE 1
Camera Drone Quick Start Guide V1.0 2020.07 Aircraft DJIMini 2features Obstacle Sensing and Infrared Sensing System*, and a fully stabilized 3‐axis gimbal with a 1/2.3” CMOS sensor camera that shoots 4K video and 12‐megapixel photos. 1. 2. 3. 4. 5. 6. 7.
PAGE 2
8. 9. 10. 11. 12. Antennas Battery Cover Charging/Upgrading Port (USB‐C) microSD Card Slot Aircraft Status Indicator Remote Controller Built into the remote controller is DJI’s long‐range transmission technology OCUSYNCTM 2.0, offering a maximum transmission range of 5 mi (8 km) and displaying video from the aircraft to DJI Fly on your mobile device at up to 1080p. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
PAGE 3
Download the DJI Fly App and Watching Tutorial Videos Search “DJI Fly” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. Charging the Batteries Checking the Battery Levels and Powering On/Off Press once to check the battery level. Press, then press and hold to turn on/off.
PAGE 4
Preparing the Aircraft 1. Remove the gimbal cover from the camera. 2. Unfold the front arms and the propellers. 3. Unfold the rear arms and the propellers. 4. Unfolded Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff. Preparing the Remote Controller 1. Attach the control sticks.
PAGE 5
2. Pull out the mobile device holder, and then unplug the end with mobile phone mark of the RC cable. 3. Place the mobile device onto the mobile device holder, and plug the RC cable into the mobile device.  Ensure the control sticks are firmly mounted.  The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller.
PAGE 6
Preparing for Takeoff 1. Power on the remote controller 2. Power on the aircraft 3.
PAGE 7
Specifications • Aircraft (Model:MT2PD) Weight 241 g Max Flight Time 30 minutes (0 wind while flying at a consistent 15.5 mph (25 kph)) Operating Temperature 32° to 104°F (0° to 40°C) • Camera Sensor 1/2.3’’ CMOS; Effective pixels: 12M Lens FOV: 83° 35mm format equivalent: 24 mm Aperture: f/2.8 Focus: 1 m to ∞ ISO Range 100‐3200 Electronic Shutter Speed 4‐1/8000 s • Remote Controller Operating Voltage • 1200mA @ 3.7V (Android) 700mA @ 3.
PAGE 8
FCC Compliance Notice(For plane) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.