User's Manual

Table Of Contents

Updating the

Thumb Controller and the Receiver

You can nd the latest rmware version information on this page

and update the rmware by following the steps below:

e the Micro-USB cable to connect the Thumb Controller to

your computer, then wait until the indicator in the Assistant blinks

blue.

2. Click “Update.”

Wait

for the download to nish.

4. Click “Update” again and then click “Conrm.”

5. After the update is complete, turn the Thumb Controller off and

then on again.

6. Repeat this process with the Ronin-M or the

Ronin External

Receiver, depending on your model.