User's Manual

©
2016 DJI All Rights Reserved.
7
TIPS
If the linking process does not complete after 15 seconds, check the HDMI
connection on both the Transmitter and Receiver.
Linking
The Transmitter is linked to the Receiver before delivery. Linking is only required when
using a new Transmitter or Receiver.
Ensure the Transmitter and Receiver are properly connected to the HDMI device
before linking to avoid failure.
How to link
Press the Link button on the Transmitter once. The linking process will complete in
approximately 10 seconds.
Transmitter Status LED Receiver Status LED Description
......
Blinks red
slowly
......
Blinks green
slowly
The device is not linked and not
connected to the HDMI device.
......
Blinks red
quickly
......
Blinks green
quickly
Linking but the Transmitter is not
connected to the HDMI device.
......
Blinks green
quickly
......
Blinks green
quickly
Linking in progress
—
Solid green
—
Solid green
Linking successful and working
normally
Status LED Descriptions