Quick Start Guide


2. Balancingdepthforthetiltaxis
a. Rotate the tilt axis so that the camera lensis pointing forward. Toggle the levertothe
unlockedposition.
b. Check to make sure the camera is not front or back‐heavy. If front‐heavy, move the
camerabackwardbyturningthe
knob.Ifback‐heavy,movethecamer aforward.
c. Toggle the levertothe lockedpositon.The Tilt axis is balanced if thecamerais steady
whiletiltingupordownfor45degrees.
d. Lockthetiltaxis.

3. Balancingtherollaxis
a. Unlocktherollaxis.Toggle
theleverontherollarmtotheunlockedpositon.
b. Check the direction in which the roll motor swings. If the camer a rotates to the left,
movethecameratotheright.Ifthecamerarotatestotheright,movethecameratothe
left.