Owner's Manual

Voltage Inputs - AV Inputs

These Inputs are able to sense a Voltage level but not offer Frequency detection

Example of sensors which normally use on these Inputs are:

- Manifold Pressure sensors

- Throttle Positions

- Oil Pressures

Voltage Inputs are not just limited to the above they can also be used for any sensor which outputs a

0-5volt signal. They Do NOT have an internal 3k software configurable pull up like the AS Inputs for

thermistor sensors. This needs to be set externally in the loom.

Pin Number Input Scal Assignment

A6 AV7 Slave*An7

A15

Slave*An

A7 AV9 Slave*An9

A16 AV10 Slave*An10

B3 AV17 Slave*An17

B11 AV18 Slave*An18

B4 AV19 Slave*An19

B12 AV20 Slave*An20

Sensor Schematics - Examples

Speed Sensor – Magnetic Type

Example Schematic

Pin Schedule

Pin Number Function Notes

A25 ANGND1 May be shared with multiple sensors

A4 AS3 Can use Inputs AS1-12 or AV13-20 with External

pullup