Owner's Manual

Contents
1 x Syvecs AWD ECU
1 x USB Cable
1 x BurnOut Switch (Optional)
1 x 20k Rotary Potentiometer (Optional
Installation
First you need to locate the 4WD Ecu on the R35GTR, this is found on
the right hand side on the Vehicle under the appropriate seat – LHD
Drive cars this is passenger seat, RHD drive cars this is the driver’s seat.
Removing the seat is done by unclipping the 4 plastic bolt covers in each
corner of the seat and then using a 14mm socket turning the bolts
anticlockwise.
Carefully then tilt the seat backwards and unplug the 3 electrical
connection.