Owner's Manual

Calibration Switching on the AWD ECU
The Syvecs AWD Unit allows for users to be able to adjust many aspects of the control strategies inside the AWD Ecu via either an
external switch or via OEM controls / buttons with plug in AWD units.
At the top of the Scal AWD Calibration tree you will find the Calibration Switch section which list all the maps that can be adjusted
based on awdSelect position. There is 4 positions available which can be used to adjust multiple duty maps or if limp modes are
active.
Users are able to see the active awdSelect position by viewing it via the right item list. Double clicking on the item will bring up a
larger gauge.
The 997 AWD unit sets the awdSelect position based on the follow OEM Modes:
Normal Mode – awdSelect = 1
Sport Mode - awdSelect = 2