Warranty

6.Laser adjustment holes
Stretchablefilllight
oerindicator
1/2.Power/Sleep button
7.Menu/Laser red dot
Battery compartment cap
3yeiecediotre
adjustmentring
Data cap
icatinnyrail
4Objectivelens
focusingadjustmentring
HDhigh-definition
interface
TF card slot
SBchargingort
Components
1*HT60 Standard Version; 1* Micro USB cable;
2*Hex-nut wrenches; 1* Mount
Storage card is not included. Please prepare a TF card (128g maximum) for data
storage.
Installation
Battery
lease use lithiumchargeable3.7Vflat battery1650. Removebatterycom-
partment cap and make sure setting the positive polar towards to the direction
inward. Put the cap back and screw it until tight. ( Fail to do so may result in
restarting!).
Adjustments
Tocheckthefunctionaftertheinstallationofbattery.First,rotateandadjustthe
eyepiecedioptreadjustmentring(3untilyouseethefour-charactericononthe
screen(there'snoneedtoseeaclearimage,thenrotatetheObjectivelens
adjustmentring(4untilyoucanseeyourtargetclearly.Second,switchtodiffer-
entmodes,testR,ReddotorRangefinder.
Mount Installation
There are three mounting holes in the base of the device. Attach the mount to
the base of the device by using a hex-nut wrench and screws. The mount can be
installed in multiple rails.
-4-
-5-
-6-
-3-
2.
3.
1.