Owner's manual

How to use and care the blade
1. Hold the handle of the hair clipper and push the upper part outwards and away from the blade. (Please
see picture)
2. Using the brush, clean the blade in order to remove excess hair which may be caught between the
blades. Lubricate the space between the fixed blade and the moving blade with 2 or 3 drops of oil after
every few uses.
3. To place the blade back on the clipper, first set the dial to 2.0mm, then place the blade back in the
correct position and then push it in until it clicks firmly in position (please see picture).
After using
Clean the unit after every use and keep the switch turned off to maintain optimal performance.