Safety Information

Receiver Collar:
• Touch the magnetic charging cable to the
back of the receiver. Plug the adaptor, the
Blue LED flashing indicates in charging.
• When the battery bar in Display is in lower
level / , please stop to use and
charging immediately.
• If the Blue LED light on Receiver Collar
flashes slowly once per 5 seconds
indicates low battery. Please charge the
device immediately. The Blue LED light
will flash once per 8 seconds at normal
working status.
• When fully charged, the Blue LED
indicator will be come solid.
Operating GuideOperating Guide
Warning:
Please use those with 5V
output voltage. The output
voltage information is usually
described on the surface of
power adapter. Power
adapter with output voltage
over 5V may cause damage
to the training collar.
The Remote Training Collar use Lithium-Polymer batteries. DO
NOT charge the device near any flammable substances. Fully
charge the Remote Transmitter and Receiver Collar before use.
Charge the Remote Training Collar if:
• The indicator light on the Receiver Collar is blinking rapidly.
• There is only 1 battery level bar left on the Remote Transmitter
LCD display.
• The indicator light on the Remote Transmitter and Receiver
collar will not come on.
Step 6
Charging
the Device
Charging Steps:
1. Plug the adaptor into a standard wall outlet.
2. Connect the USB cable connectors to the charging jack on
Receiver Collar and Remote Transmitter.
3. Connect the USB cable port to the power adapter, power band
or your PC.
Notes:
Remote Transmitter:
• Plug the adaptor, the battery icon on the LCD display will scroll
when charging.
• When fully charged, the Battery bar is fully and stop running.
• When the battery bar is only 1 battery level display, please
charging immediately.
• When the battery bar is empty , please stop to use and
charging immediately.
15 16