User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. The Device
- Chapter 3. Getting Started with CAREU P2
- Chapter 4. Using the CAREU P2
- AT$SGF Self Geo-fence alert settings
- AT$SGFEN Self Geo-fence alert enable
- AT$PDSR Position and device status reporting settings
- AT$DOWN Man Down Detection settings
- AT$DOWNEN Man Down alert enable
- AT$SOS SOS Tracking Report Configuration
- AT$BLEEN BLE alert enable
- Chapter 5. About Systems & Technology Corp.
- Chapter 6. Declaration
- Chapter 7. Regulations
CAREU P2 Personal Tracker User Guide
4
Note: Before installing the SIM card, be sure to remove SIM protection (PIN
code) with a mobile phone.
• Remove the plastic strip from the battery.
• Place the battery into the battery compartment.
• Restore the back cover to its original position.
Note: Before restoring the back cover, make sure the SIM card and battery are
installed properly in place.
• Optional: Place the CAREU P2 into the jelly case cover.
Note: The jelly case may protect your CAREU P2 from dust and scratches while
allowing you full access to the three buttons and mini USB port.
2. Power on the Device
Power on/off your CAREU P2 with the Power Button.
• Power On
To power on CAREU P2, press and hold the Power
Button for 2 seconds. Then CAREU P2 will make a long
beep to indicate power-on status.
BV Certificate Use
2017/02/06 17:09