User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. The Device
- Chapter 3. Getting Started with CAREU P2
- Chapter 4. Using the CAREU P2
- AT$SGF Self Geo-fence alert settings
- AT$SGFEN Self Geo-fence alert enable
- AT$PDSR Position and device status reporting settings
- AT$DOWN Man Down Detection settings
- AT$DOWNEN Man Down alert enable
- AT$SOS SOS Tracking Report Configuration
- AT$BLEEN BLE alert enable
- Chapter 5. About Systems & Technology Corp.
- Chapter 6. Declaration
- Chapter 7. Regulations
CAREU P2 Personal Tracker User Guide
3
• Notification LED
1. Power LED: Red lights
• Red: Charging
• OFF: Fully charged / Discharging
2. GSM LED: Blue light
• Flashing (once every 3 seconds): Searching signals
• Flashing (once every 10 seconds): Receiving signals normally.
3. GPS LED: Yellow light
• Flashing (once every 3 seconds): Searching signals in normal mode
• Flashing (once every 10 seconds): Searching signals in A-GPS mode
4. GSM+GPS LED:
• Flashing (three times every 5 seconds): SOS Event.
• Flashing (once every 3 seconds):
Self-Geo fence mode
2.3. Setting up the Device
1. Install SIM Card and Battery
• Open the back cover by removing the mini screw.
Note: For CAREU P2 to function, install a SIM card first.
• Fit the SIM card into SIM card socket with the metal contact facing down.
BV Certificate Use
2017/02/06 17:09