User's Manual

6
Chapter 3 Getting Started with CAREU U1 PLUS
To install the the CAREU U1 PLUS device, follow the instructions below for
basic operations
3.1 Device Configuration
1. Connected the serial port 1 to PC COM port
2. In Windows desktop, click Start | All Programs | Accessories | Communications
| HyperTerminal.
3. If you are prompted to input the information of your location, complete them to
proceed.
4. On the File menu of HyperTerminal, click New Connection.
5. In the Name box, type a name that describes the connection. In the Icon box, click
an appropriate icon. Press the OK button to proceed.
6. For Com port properties, configure as follows: Baud Rate --> 115200 bps
Data Bits --> 8
Parity --> None