User's Manual

CAREU UCAN 3G - User Guide
Chapter 1
1
Chapter 1 Introduction
1.1 Features
Thank you for purchasing CAREU UCAN 3G GPS
Vehicle Tracker, a plug-and-use device for tracking and
vehicle status diagnostics.
● SMS, GPRS TCP/UDP, USSD, FTP communications
● Plug-and-use design and cost effectiveness
● DTC OBD II error codes
● GSM/GPRS simultaneously
● Real-time tracking (Time, Distance Interval or Intelligent Mode, and Heading)
● Firmware upgrade over the air (via GPRS from FTP)
● Journey report wireless download
● Battery low alert
● Geofence reports
● Mileage reports
● User-defined reports
● Up to 100,000 data logs
1.2 Scope
This document will guides you to start the CAREU UCAN 3G Vehicle Tracker.
However,as this document contains basic device configuration only, please see the
CAREU UCAN 3G Protocol Document for the advanced information.
1.3 About CAREU UCAN 3G
Designed with the latest GPS technology, the CAREU UCAN 3G delivers positioning
message by GSM wireless transmission to GIS platform, and then helps back-end users
proceed with the analysis and the applications of vehicle transport, management, anti-theft,
security and tracking.
A microcontroller can probe location and command data at regular intervals, derive actions
from location, peripheral and control data, and execute such actions. Peripheral data
indicates the status of various peripherals connected to and/or controlled by the device.
Among the best features of the CAREU UCAN 3G Vehicle Tracker, in particular, they
transmit data in ASCII mode (Intellitrac X Series compatible mode) or binary mode.