User's Manual

CAREU UCAN
-
User Guide
Chapter 3
18



The main page of the Intelli FleetWeb appears as below:
























3.6 Firmware Upgrade

The firmware of the CAREU UCAN can only be updated through USB interface.
With the firmware loader tool provided by S&T, firmware update can be done for
the device. Such firmware loader runs on Windows-based systems. To upgrade
the firmware, follow the procedure below

1. Connect the device to your PC with the USB cable.
2. Connect the device to power.
3. Power on the device.
4. Run ServerUSeries.exe. A window displays as follows:


5. Press browse the button to browse to the firmware provided by S&T.
6. Press the Start button to run the firmware program.
7. After the writing progresses to 100%, it takes about 20 seconds for the update
to completes.
8. Firmware update completes.