User's Manual
Chapter 3
14
CAREU U1 Vehicle Tracker User Guide
3.3. USB Device Driver Installation
CAREU U1 communicates with your host computer by either RS-232 or USB
interface.
In some newer editions of Windows XP, the U1 device can be installed as a "virtual COM
port" device whereby U1 would automatically access Windows XP's inbox USB drivers.
While in some other earlier editions of Windows XP, you would need to manually
install the USB driver for the U1 device. In the following content of this section,
you will be guided to how the installation can be done in both cases.
To install the device driver for U1,
Connect the U1 device to your system with an USB cable as mentioned in USB Cable
Connection on page 10.
As soon as the connection is made between U1 and your computer, a balloon appears
above the notiîš¿cation area saying an USB device is found.
Click on this balloon to start [Found New Hardware] wizard.
Select No, not this time. Press Next button to proceed.
S&T Confidential Documents