User's Manual

Chapter 3
8
CAREU U1 Vehicle Tracker User Guide
2. GPS Antenna Connection
Connect the GPS antenna to the SMA connector jack on the front side of the device
(circled as the illustration below) by completely screwing the GPS antenna's plug
connector.
It is recommended that a matching torque 7-10 inch pounds (80-110 N.cm) should
be used for the SMA connector.
3. GSM Antenna Connection
Connect the GSM antenna to the SMA connector jack on the front side of the device
(circled) as illustration below) by completely screwing the GSM antenna's plug
connector.
It is recommended that a matching torque 7-10 inch pounds (80-110 N.cm) should
be used for the SMA connector.
S&T Confidential Documents