User's Manual

IntelliTrac A3 Series User Guide
Systems & Technology Corp. © 2009
This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.
- 14 -
(2) GPRS Configuration
Setting GPRS server using the following commands:
AT$APN=internet,username,password (APN=internet, Username=username, Password=password)
OK
AT$HOSTS=1,0,60.148.19.10,5011 (“1” is the Index number of Hosts,
“0” is to use Static IP as the indication of server location,
“60.148.19.10” is the Server IP address,
“5011” is the port assigned for port listening.)
OK
AT$RETRY=5,10 (Message retry settings)
OK
AT$IPTYPE=1 (Using TCP/IP mode)
OK
AT$GPRSEN=1 (GPRS enable)
OK
AT$HB=60,0 (Heartbeat setting)
OK
Please refer to IntelliTrac A Series Protocol Document for detailed command descriptions.